Installation Guides
Install in 20 Minutes. Watch the Video.
Step-by-step videos and PDFs for every YOTRUTH seat cover, organized by vehicle. Most installs take 15-30 minutes per row.
Find your install guide
Search and browse.
Browse by make, difficulty, or install time.
General install steps
Universal flow.
- Park & ventilateOpen all doors if cabin is hot.
- Remove headrestsPull straight up while pressing release buttons.
- Position bottom cover firstWork to corners and tuck front edge.
- Position back coverSlip over seat back and tuck bottom band.
- Connect strapsPull tight and re-attach headrests.
- Check airbag accessConfirm the airbag flap is aligned.
Time: 15-20 min per seat for experienced installers; 25-35 min first time.
Browse by vehicle
Install index.
Troubleshooting FAQ
Install fixes.
The cover is too tight at the corners.
Normal for first install. Fabric stretches over 24 hours.
The straps will not reach.
Confirm correct cab type.
There is a gap at the top.
Push the cover further down and tighten bottom straps.
The airbag flap will not align.
Reverse the install and re-check alignment. Email photos if needed.
My headrest hole is too small.
Gently stretch the reinforced hole and push the post through.
My seat has a built-in armrest.
Check whether your cover variant is the fold-down armrest version.